Multiple cameras

Duka Istvan · Post by **Duka Istvan** » Tue Nov 19, 2013 10:57 pm

Hi tomorrow i will try to upload a better diagram and some pictures how was made.

Hi tomorrow i will try to

tuffi · Post by **tuffi** » Wed Nov 20, 2013 12:27 pm

Thanks, only one other questions, can I use dcc with the WIFI and Ethernet adapter for D800? My project are an airborne application and the vibration are a big problem for a usb connector that after same minutes tends disconnect itself!

Duka Istvan · Post by **Duka Istvan** » Wed Nov 20, 2013 9:01 pm

Check this link http://digicamcontrol.com/manual/multip ... rol-device there are just images i will add text too later.The software not support yet linking via WIFI, because i don't have any occasion to test one.

tuffi · Post by **tuffi** » Thu Nov 21, 2013 5:08 pm

Good, Thanks, so eventually i must use a 10 pin plug right?

Duka Istvan · Post by **Duka Istvan** » Thu Nov 21, 2013 5:22 pm

I use a msp430launchpad inserted face down in pcb using 10 pin connectors. You can order msp430launchpad from https://estore.ti.com/MSP-EXP430G2-MSP4 ... P2031.aspx

tuffi · Post by **tuffi** » Thu Nov 21, 2013 7:07 pm

OK, I will study this option while waiting for your text.

borisi · Post by **borisi** » Sat Mar 01, 2014 9:01 pm

I need to shoot same time few cameras and get the images to the same folder each shoot.The problem is when I did connect more then one camera to PC, the program is indeteficates only firs and this one is only shooting.What is exact properties I need to change?

Duka Istvan · Post by **Duka Istvan** » Sat Mar 01, 2014 9:18 pm

If you press menu in left side will show up a button Multiple came control

borisi · Post by **borisi** » Mon Mar 03, 2014 10:20 pm

U right, I know - but it doesn't work!

Duka Istvan · Post by **Duka Istvan** » Wed Mar 05, 2014 11:29 pm

Please upload your log file

digiCamControl