Multiple cameras
-
- Posts: 867
- Joined: Tue Mar 26, 2013 9:52 pm
Hi tomorrow i will try to
Hi tomorrow i will try to upload a better diagram and some pictures how was made.
Thanks, only one other
Thanks, only one other questions, can I use dcc with the WIFI and Ethernet adapter for D800? My project are an airborne application and the vibration are a big problem for a usb connector that after same minutes tends disconnect itself!
-
- Posts: 867
- Joined: Tue Mar 26, 2013 9:52 pm
Check this link http:/
Check this link http://digicamcontrol.com/manual/multip ... rol-device there are just images i will add text too later.The software not support yet linking via WIFI, because i don't have any occasion to test one.
Good, Thanks, so eventually i
Good, Thanks, so eventually i must use a 10 pin plug right?
-
- Posts: 867
- Joined: Tue Mar 26, 2013 9:52 pm
I use a msp430launchpad
I use a msp430launchpad inserted face down in pcb using 10 pin connectors. You can order msp430launchpad from https://estore.ti.com/MSP-EXP430G2-MSP4 ... P2031.aspx
OK, I will study this option
OK, I will study this option while waiting for your text.
multicameras shooting
I need to shoot same time few cameras and get the images to the same folder each shoot.The problem is when I did connect more then one camera to PC, the program is indeteficates only firs and this one is only shooting.What is exact properties I need to change?
-
- Posts: 867
- Joined: Tue Mar 26, 2013 9:52 pm
If you press menu in left
If you press menu in left side will show up a button Multiple came control
multicameras shooting
U right, I know - but it doesn't work!
-
- Posts: 867
- Joined: Tue Mar 26, 2013 9:52 pm
Please upload your log file
Please upload your log file