Page 1 of 1

waiting for device to be ready

Posted: Mon Oct 22, 2018 11:06 pm
by Guli23
Hello, I have a problem... I have the Nikon D5100 and if I connect my camera and on Livecam everything goes functioned, however, after a time stands there: waiting for device to Be ready.
Then it loads 2-3 seconds and the picture comes again, how can I remove it?


PS: I come from Germany and it would be better if the German Community it in German would write...

Deniz

Re: waiting for device to be ready

Posted: Tue Oct 23, 2018 9:15 am
by Duka Istvan
This is a camera function which will auto turn of the live after a period the time can be set in the camera menu but for D5100 can't be disabled

Re: waiting for device to be ready

Posted: Tue May 19, 2020 8:45 am
by oslec
hi! did you find a solution to your problem? i have the same issue with your and still looking for a solution.. Hope you could help.

Re: waiting for device to be ready

Posted: Fri Jun 12, 2020 9:40 pm
by jerryyyyyyyyyy
Maybe I am having a similar problem. I am getting this wait and reliability is an issue...
2020-06-12 08_05_15-Observatory3.jpg
2020-06-12 08_05_15-Observatory3.jpg (115.57 KiB) Viewed 6291 times

Re: waiting for device to be ready

Posted: Sun Jun 14, 2020 3:39 am
by jerryyyyyyyyyy
My D800 had Long Exposure NR turned on by default. This takes a second dark exposure... Need to get that turned off routinely. Seems to come on as soon as camera is started.

Re: waiting for device to be ready

Posted: Wed Jun 17, 2020 7:15 pm
by Andydufau
Duka Istvan wrote: Tue Oct 23, 2018 9:15 am This is a camera function which will auto turn of the live after a period the time can be set in the camera menu but for D5100 can't be disabled
Hi Duka, do you know please how to set that on the menu?

The time by default is 3', even if you can't turn off this feature, I'd like to try to make longer the time between cuts.

Thank you!