live view doesn`t works.  [SOLVED]

Support and help for digiCamControl (no bug report)
Post Reply
swj0224
Posts: 4
Joined: Fri Nov 23, 2018 1:48 pm

live view doesn`t works.

Post by swj0224 » Fri Nov 23, 2018 1:55 pm

I`d got a sony hx60 to use in Digicamcontrol.

It is plugged via usb and also the programm recognizes hx60

But the live view button isn`t activated.

I wanna use hx60 as webcam.

Please let me know the solution
no.PNG
no.PNG (59.23 KiB) Viewed 7187 times

live view doesn`t works.

Advertisment
 

Duka Istvan
Posts: 684
Joined: Sat Oct 03, 2015 7:57 pm

Re: live view doesn`t works.

Post by Duka Istvan » Fri Nov 23, 2018 4:56 pm

Hi, sony cameras are supported using wifi connection only

swj0224
Posts: 4
Joined: Fri Nov 23, 2018 1:48 pm

Re: live view doesn`t works.

Post by swj0224 » Sun Dec 02, 2018 9:03 pm

Duka Istvan wrote: Fri Nov 23, 2018 4:56 pm Hi, sony cameras are supported using wifi connection only
Thank you Istvan, I didn`t saw warnings.

Now I connected cam via wifi with pc.
But there is new problem, I can`t activate wifi connection in digicamcontrol.
it says no camera was found.
I set wifi provider:sony, ip address:auto

no.PNG
no.PNG (8.33 KiB) Viewed 7172 times

Duka Istvan
Posts: 684
Joined: Sat Oct 03, 2015 7:57 pm

Re: live view doesn`t works.  [SOLVED]

Post by Duka Istvan » Mon Dec 03, 2018 8:44 am


swj0224
Posts: 4
Joined: Fri Nov 23, 2018 1:48 pm

Re: live view doesn`t works.

Post by swj0224 » Mon Dec 03, 2018 5:20 pm

Duka Istvan wrote: Mon Dec 03, 2018 8:44 am Can you check this link http://digicamcontrol.com/doc/userguide/interface/wifi
I see. It only works in TP-Link MR3040 with a custom firmware. Thank you for your answer

Post Reply