Hi Duka,
Yeah, Digicamcontrol is so so so amazing.
The same with all another guys on here THANK YOU for your great job.
I have an camera system for 3D body scan, and i have some problem with your software:
Version V2.0.0:
_ Connect J4 by usb to my laptop, the dCC is stuck, it show J4 connected but serial number is 000000, when i disconnect it, dCC run like normal
_ Connect D3200 via USB:
I try to connect 10 Nikon D3200 but i only get 8-9 cameras, my laptop said that it not enough USB controller resource. i try on many type of usb hub, but i alway get 8 or 9 cameras, when i unplug 1 camera, it will get only 1 another camera.
_ Connect D3200 via DSLRdashboard :
+ I can connect the camera, i have 3 ip : 192.168.2.10 ( 3 cameras), 192.168.2.50 ( 6 camera), 192.168.2.100 ( 1 camera), and it get all 10 cameras ( yeah). But i must add each camera by each click @_@ ( nightmare if camera over 100s , so can get all camera of IP for one click ?).
+When i click Capture Photos, i can hear all of camera capture but it can not transfer the images to my laptop, it show " transfer error"
+On Live view windows, i click Start Live View, dCC crashes.
+I open dCC again, then try to connect dslrdashboard server, it can not connect to any cameras. Then i reset all of routers, dCC can connect but with each IP, it only get 1 camera @@.
https://goo.gl/photos/MKR1zkyF7SUhuniy8
Version V2.0.49.0:
_ Connect J4 by usb to laptop, the dCC is stuck like V2.0.0, but it show J4 serial number is 2015965 not 00000 like V2.0.0, when i disconnect it, dCC run like normal
https://goo.gl/photos/y36MHJ5grqS7NmCe7
_ Connect D3200 via DSLRdashboard :
Itry to connect dslrdashboard server but with each IP, it only get 1 camera, i try to capture photos, i hear all of 3 camera is capture, but it transfer only one image. And each one i click to Wifi, it clear all my select before ( on V2.0.0, it save what i choose before).
https://goo.gl/photos/CAvjvKdCTh977SXg6
https://goo.gl/photos/vYtpxXycV8CRBDPF9
Here is all the log file :
https://drive.google.com/open?id=0B__qR ... FlwbDI5N0U
sorry for my poor English
P/S: i try to paste direct link of image from my google photo, but it over 6000 words for one post @@
Nikon J4 stuck and DSLRdashboard server problem
-
- Posts: 3
- Joined: Fri Jan 16, 2015 11:06 am
-
- Posts: 3
- Joined: Fri Jan 16, 2015 11:06 am
Re: Nikon J4 stuck and DSLRdashboard server problem
Hi Duka,
Can you support for Nikon J4 ?
Do you have any suggest for USB Hub or something to connect 60 camera to 1 pc ( for 3d full body scan application) ? and how about the dslrdashboard server ?
Thanks for great jobs
Can you support for Nikon J4 ?
Do you have any suggest for USB Hub or something to connect 60 camera to 1 pc ( for 3d full body scan application) ? and how about the dslrdashboard server ?
Thanks for great jobs