Triggering automatically

Post Reply
MCARTXAT
Posts: 2
Joined: Fri Apr 21, 2017 11:42 am

Triggering automatically

Post by MCARTXAT » Fri Apr 21, 2017 11:49 am

Hi,

For a project I would neeed to trigger 3 EOS 1000D cameras simultaneously which is possible thanks to the programm but would it be possible to modify the code in order to do it automatically when I want to.
The cameras are fixed on a moving support, when arrived at a defined position I would like the cameras to trigger automatically then the support would move to the next position and the operation would repeat again several times.

Thanks for your answers :)

Triggering automatically

Advertisment
 

admin
Site Admin
Posts: 225
Joined: Tue Sep 15, 2015 8:33 pm

Re: Triggering automatically

Post by admin » Mon Apr 24, 2017 11:40 am

Hi,
Which device is used to detect the camera position ? And how this device communicate with PC ?

MCARTXAT
Posts: 2
Joined: Fri Apr 21, 2017 11:42 am

Re: Triggering automatically

Post by MCARTXAT » Mon Apr 24, 2017 12:22 pm

Hi,

Currently the support is controlled by a software called Labview. It allows us to move it to defined positions and know its position in real time. Is it possible through the software to send a signal to Digicamcontrol Application to capture the photos ? The device communicate via wifi, ethernet cable or usb.

Thanks for your help

admin
Site Admin
Posts: 225
Joined: Tue Sep 15, 2015 8:33 pm

Re: Triggering automatically

Post by admin » Mon Apr 24, 2017 3:43 pm


Post Reply