I was wondering if there any chance of support for the fuji x range of cameras. I have an x-m1 and x-t1 and it would be great to use this fantastic sensor on my PC as a webcam.
The guys at Fuji are usually very good at responding to user requests for firmware upgrades and I'm hopeful it would not be too hard (sorry for my presumption) as Nikon and Fuji have a shared history.
Thanks in advance
Fuji Camera Support
-
- Posts: 684
- Joined: Sat Oct 03, 2015 7:57 pm
Re: Fuji Camera Support
Hi, not planed in near future, i need to have access to a camera model to add support for it, even in this case may happen to be impossible because no control functions are implemented in camera firmware.
Re: Fuji Camera Support
Any change in this? The new Fuji firmware for the XT-2 now adds tethering capability.Duka Istvan wrote:Hi, not planed in near future, i need to have access to a camera model to add support for it, even in this case may happen to be impossible because no control functions are implemented in camera firmware.
http://www.fujifilm.com/news/n161031_02.html
-
- Posts: 684
- Joined: Sat Oct 03, 2015 7:57 pm
Re: Fuji Camera Support
Do you own a XT-2 ?
Re: Fuji Camera Support
I do. Wouldn't make much sense to ask otherwiseDuka Istvan wrote:Do you own a XT-2 ?
-
- Posts: 684
- Joined: Sat Oct 03, 2015 7:57 pm
Re: Fuji Camera Support
Please send you mtptester file http://oldsite.digicamcontrol.com/manual/testing-camera
-
- Posts: 1
- Joined: Tue Feb 21, 2017 10:20 am
Re: Fuji Camera Support
Hey ! I own a Fuji X70 and I need to couple 3 of them in order to take photos at the same time but unfortunately the software doesn't support this model yet. Would it be possible to do something about it ? Thank you very much
Re: Fuji Camera Support
I have a Fujifil X-T1 camera. Since the last several firmware updates thethering is enabled in the X-T1 and X-T2.
A very simple Tethering is implemented with the "Fujifilm X Acquire" software which is available for free frum the Fuji website.
Capturing via USB is even possible with digiCamControl, no other function is supported. After extiting digiCamControl or unplugging the USB cable, taking images with the camera is disabled. To shoot images I have to switch off and on the camera.
I hope, that this behavior can be solved, and other functionality can be added. I send the output of the MtpTester.exe program generated with camera firmware V5.20 in the attachment.
Best regards,
Bela
A very simple Tethering is implemented with the "Fujifilm X Acquire" software which is available for free frum the Fuji website.
Capturing via USB is even possible with digiCamControl, no other function is supported. After extiting digiCamControl or unplugging the USB cable, taking images with the camera is disabled. To shoot images I have to switch off and on the camera.
I hope, that this behavior can be solved, and other functionality can be added. I send the output of the MtpTester.exe program generated with camera firmware V5.20 in the attachment.
Best regards,
Bela
- Attachments
-
- Fujifilm_X-T1_with_firmware_V5.20.xml
- (15.49 KiB) Downloaded 810 times