Canon Transfer Mode ??

Report bugs and errors to the digiCamControl development team.
Post Reply
kimys
Posts: 5
Joined: Tue Dec 19, 2017 4:12 pm

Canon Transfer Mode ??

Post by kimys » Tue Dec 19, 2017 4:17 pm

Unlike Nikon, Canon's default Transfer mode seems to be [1.Save to PC only]??

If I change it to [3. Save to PC and camera], of course it does work well.
But I turn off and again turn on Canon...it eventually returns to [1. Save to PC only]

https://youtu.be/97KYoG5ZrTA

How can I save Canon Transfer mode to [3. Save to PC and camera] ??
Thanks in advance.

[PS] Option check [File->Settings->Advanced->Load Canon transfer mode] is NOT solution in this case.
Last edited by kimys on Wed Dec 20, 2017 9:29 am, edited 1 time in total.

Canon Transfer Mode ??

Advertisment
 

Duka Istvan
Posts: 684
Joined: Sat Oct 03, 2015 7:57 pm

Re: Canon Transfer Mode ??

Post by Duka Istvan » Wed Dec 20, 2017 8:38 am

Which version of the application do you use ?

kimys
Posts: 5
Joined: Tue Dec 19, 2017 4:12 pm

Re: Canon Transfer Mode ??

Post by kimys » Wed Dec 20, 2017 9:28 am

It is ver. 2.0.74

Nikon remembers the last used transfer option 1 or option 3.
However, for Canon, the transfer option always returns to 1. when I turn the power back on.

I hope Canon will be the same way as Nikon.

kimys
Posts: 5
Joined: Tue Dec 19, 2017 4:12 pm

Re: Canon Transfer Mode ??

Post by kimys » Mon Jan 29, 2018 4:13 pm

Oh~~It works perfectly in version 2.0.72.
Thank you.

malowz
Posts: 1
Joined: Wed Feb 28, 2018 7:00 am

Re: Canon Transfer Mode ??

Post by malowz » Wed Feb 28, 2018 7:03 am

hi, im just starting to use digicamcontrol and loving it!. but i also have the same issue, using last beta version (.79) with a canon 80D, is goes to "PC only" after reconnecting the camera.

using the older version as mentioned (2.0.72) the setting is saved correctly after reconnecting.

thanks!

Duka Istvan
Posts: 684
Joined: Sat Oct 03, 2015 7:57 pm

Re: Canon Transfer Mode ??

Post by Duka Istvan » Wed Feb 28, 2018 4:41 pm

You have a option for this File=>Settings=>Advanced=>Load canon transfer mode

kimys
Posts: 5
Joined: Tue Dec 19, 2017 4:12 pm

Re: Canon Transfer Mode ??

Post by kimys » Mon Mar 05, 2018 5:43 pm

Hi~~Duka
Checking the option "Load Canon transfer mode" does work normal ONLY in Ver 2.0.72

Post Reply