Multi-camera usage booting cameras

Support and help for digiCamControl (no bug report)
Post Reply
jhilmas
Posts: 1
Joined: Wed May 26, 2021 7:20 pm

Multi-camera usage booting cameras

Post by jhilmas » Wed May 26, 2021 7:27 pm

Hello,

I am currently trying to use 3 Canon cameras (two T7's and one _____). When I connect all three, they show up in the multi camera tab, but only the one most recently connected will work. For example, if I plug in camera 1 by itself, it will go to a live feed and capture a photo with no problems. If I then connect camera 2, camera 1 still shows up as if it would be working but it displays the error "Invalid handle: propertyld 1281" and it won't take a picture or go to live view. However, camera 2 then begins to function fine on its own. The same thing happens when I connect the third camera, it boots out the second and only the third camera can function. If anyone knows how to fix this issue let me know! I can also provide more in-depth detail if needed :)

Multi-camera usage booting cameras

Advertisment
 

admin
Site Admin
Posts: 171
Joined: Tue Sep 15, 2015 8:33 pm

Re: Multi-camera usage booting cameras

Post by admin » Wed May 26, 2021 9:32 pm

Please upload your logfile c:\ProgramData\digiCamControl\Log\app.log or send it to admin [at] digicamcontrol.com

Post Reply