D5300 and ddserver

Support and help for digiCamControl (no bug report)
Post Reply
warwound
Posts: 3
Joined: Sat Jul 16, 2022 4:45 pm

D5300 and ddserver

Post by warwound » Sat Jul 16, 2022 5:42 pm

Hi.

I'm using the latest version of digiCamControl and have no problems controlling my D5300 via wireless *when using my D5300's built in wifi*.

I have installed ddserver on a Pi Zero W and am trying to use this instead of my D5300's built in wifi.
So far everything works except for file transfer, if i set digiCamControl to save images to my PC then it fails every time - i end up with a zero byte JPG on my PC.

Is this a known issue or something that can be fixed?

Thanks.

Martin.

D5300 and ddserver

Advertisment
 

warwound
Posts: 3
Joined: Sat Jul 16, 2022 4:45 pm

Re: D5300 and ddserver

Post by warwound » Sun Jul 17, 2022 4:09 pm

I ought to have added to my original post:
This same ddserver setup runs perfectly with qDslrDashboard - when I select 'save image to PC' it successfully downloads the image to my laptop.

warwound
Posts: 3
Joined: Sat Jul 16, 2022 4:45 pm

Re: D5300 and ddserver

Post by warwound » Wed Jul 20, 2022 11:18 pm

I am now running ddserver on a GL.iNET GL-SFT1200 mini router and have the same problem.
I compiled ddserver as an OpenWRT plugin:
https://github.com/hubaiz/DslrDashboardServer/issues/38
My next step will be to look at the OpenWRT log when a file transfer fails and hope for some useful debugging info.

Post Reply