2.1.0 - Stable version
Re: 2.1.0 - Stable version
I have been running version 2.0.77.1 without problems on my Win7 laptop. I upgraded to 2.1.0 stable. It runs for a short time then "stops working" and is closed by windows. I uninstalled 2.1 and tried to reinstall 2.0 but was unable because it said a version was running. After a foray into the registry and finding and deleting all the left over references to "Digicam" I was able to install the older version but now it too is failing after a short time. The upshot is that I now have no operating version of Digicam Control and my floral specimen has died. I have a Nikon D500 and have used it successfully with this setup quite recently. Up until this little hiccup I have been totally satisfied with the software and look forward to a speedy resolution. At this point I haven't searched for a log file but if there is one, please direct me to it and I will forward same to you.
-
- Posts: 684
- Joined: Sat Oct 03, 2015 7:57 pm
Re: 2.1.0 - Stable version
HI you can send the log file from application Menu=>Help=>Send log file
Re: 2.1.0 - Stable version
Further to my previous post:
I reinstalled ver 2.0.77 on the win 7 machine, still no joy. I switched cameras back to the D5100 that was working and again no joy.
Here is the latest log file that includes the last time I used the software successfully, 2.0.77, through to the trials I did today with the D500 then the D5100 attached.
I reinstalled ver 2.0.77 on the win 7 machine, still no joy. I switched cameras back to the D5100 that was working and again no joy.
Here is the latest log file that includes the last time I used the software successfully, 2.0.77, through to the trials I did today with the D500 then the D5100 attached.
- Attachments
-
app.log
- (172.11 KiB) Downloaded 947 times
Re: 2.1.0 - Stable version
some more info.
Running 2.1.0 on my win10 desktop all seems to be good inasmuch as I can take a series of shots without any problems.
There is one oddity, however. When I first connect the camera, D500, all functions are controllable and initially report as the camera is set up.
When I switch to Live view and go to the control panel the ISO shows as "0" but is adjustable. The ISO in camera was set to 500, I set it to 100 via the control panel. The shutter speed is not controllable at all, set at 1/250 in camera. The series of shots were taken at ISO 500 and 1/250 shutter so there might be a small glitch in the control panel settings.
As an ex electronics tech I like to see things working and am willing, and able, to help wherever possible. If you require information or tests to be run please do not hesitate to ask. PM me at any time.
John
Running 2.1.0 on my win10 desktop all seems to be good inasmuch as I can take a series of shots without any problems.
There is one oddity, however. When I first connect the camera, D500, all functions are controllable and initially report as the camera is set up.
When I switch to Live view and go to the control panel the ISO shows as "0" but is adjustable. The ISO in camera was set to 500, I set it to 100 via the control panel. The shutter speed is not controllable at all, set at 1/250 in camera. The series of shots were taken at ISO 500 and 1/250 shutter so there might be a small glitch in the control panel settings.
As an ex electronics tech I like to see things working and am willing, and able, to help wherever possible. If you require information or tests to be run please do not hesitate to ask. PM me at any time.
John
-
- Posts: 684
- Joined: Sat Oct 03, 2015 7:57 pm
Re: 2.1.0 - Stable version
Can you send me the log file from that pc too ?
Re: 2.1.0 - Stable version
Good morning.
It's just a thought but when the "control" panel was doing strange things my camera was set to "auto ISO".
I'm away for a couple of days so will try with manual ISO when I get back.
John
It's just a thought but when the "control" panel was doing strange things my camera was set to "auto ISO".
I'm away for a couple of days so will try with manual ISO when I get back.
John
Re: 2.1.0 - Stable version
Goodmorning
My bullguard internet security won't allow the 2.1.0. to install. listed as Malware and quarantined
downloaded from official site
anyone?
My bullguard internet security won't allow the 2.1.0. to install. listed as Malware and quarantined
downloaded from official site
anyone?
-
- Posts: 3
- Joined: Sat Sep 29, 2018 12:29 pm
Re: 2.1.0 - Stable version
I upgraded from the 2.0.74.0 to the stable version 2.1.0.0.
Unfortunately it won't open. After installing it, it's loading and loading without opening the software. Also I tried to download the older version but it keeps telling there is still some stuff from Digicam. I tried to delete as much as possible from old reference but I fail.
I would like to explore this new stable version 2.1.0.0 but I have no
Hopefully someone can help me with this issue. Many thanks in advance.
Unfortunately it won't open. After installing it, it's loading and loading without opening the software. Also I tried to download the older version but it keeps telling there is still some stuff from Digicam. I tried to delete as much as possible from old reference but I fail.
I would like to explore this new stable version 2.1.0.0 but I have no
Hopefully someone can help me with this issue. Many thanks in advance.
Re: 2.1.0 - Stable version
There is no scroll bar in multi camera control grid view. So when I connect more than 20 cameras, there is no information can show after the 20th cameras.
Could you help to fix this problem? Thanks.
Could you help to fix this problem? Thanks.