2.0.0 - Stable version

Latest news on and announcements about digiCamControl and this forum here.
Duka Istvan
Posts: 684
Joined: Sat Oct 03, 2015 7:57 pm

Re: 2.0.0 - Stable version

Post by Duka Istvan » Sun Jan 17, 2016 11:24 am

Try to uninstall first from control and after that install the new version

Re: 2.0.0 - Stable version

Advertisment
 

MOttografie
Posts: 12
Joined: Mon Dec 28, 2015 12:40 pm
Location: 83626 Valley / Bavaria, Germany
Contact:

Re: 2.0.0 - Stable version

Post by MOttografie » Sun Jan 17, 2016 11:42 am

yep. This did the trick. It's running now, first test (shot 5-6 pics in a row) worked nice. Thank you very much! I will donate some money to your project as soon as my booth was rented.

Charly3
Posts: 1
Joined: Sat Jan 30, 2016 7:38 pm

Re: 2.0.0 - Stable version

Post by Charly3 » Sat Jan 30, 2016 7:49 pm

Hi, trouble with D800 ahead. As soon Camera is connected with digicamcontrol. It goes to "save" mode - only one (long) shutter speed does work. Any menu settings are ignored and locked. Camera is locked in this mode until a 2 button reset on camera body is carried out, even if you disconnect cable.

If you keep cable connected during 2 button reset you can shoot with digicam control afterwards (whilst loosing all user setings in camera). As soon camera is disconected and reconnected again, game starts all over.

I´ve found an older version of digicam that does work fine anyhow. Any chance go bring D800 back again in Version 2.

Reg, Charly

Duka Istvan
Posts: 684
Joined: Sat Oct 03, 2015 7:57 pm

Re: 2.0.0 - Stable version

Post by Duka Istvan » Sat Jan 30, 2016 8:02 pm

Please send your log file (Menu->Help->Send log file)

ilpaulo
Posts: 1
Joined: Sun Feb 14, 2016 8:45 pm

Re: 2.0.0 - Stable version

Post by ilpaulo » Sun Feb 14, 2016 8:51 pm

I have installed the stable version in windows 10.. but the program don´t work correctly... I need make a timelapse, i configure whit 25 shoot.. but only 2 photos appears...
Sorry my english!!! :D :D

christian
Posts: 1
Joined: Tue Feb 16, 2016 9:10 pm

Re: 2.0.0 - Stable version

Post by christian » Tue Feb 16, 2016 9:13 pm

Duka Istvan wrote:If you have any problem or observation with this release please post in this forum thread.

More about this version:
http://digicamcontrol.com/news
The link to contact you via email is broken, is there any other way to contact the digicam team? (custom development)

Duka Istvan
Posts: 684
Joined: Sat Oct 03, 2015 7:57 pm

Re: 2.0.0 - Stable version

Post by Duka Istvan » Tue Feb 16, 2016 9:42 pm

You can use admin[at]digicamcontrol.com for me the contact form working http://digicamcontrol.com/contact

whargis
Posts: 1
Joined: Tue Feb 16, 2016 11:56 pm

Re: 2.0.0 - Stable version

Post by whargis » Wed Feb 17, 2016 12:12 am

I’m trying version 2.0.0 under Windows 8.1 with a Nikon D5500 and I’m having a couple of problems with it. First, exposure bracketing only works sporadically. I set the bracketing parameters, click Start, and usually nothing happens. On rare occasions it does work though, capturing the bracketed images properly. Also, the capture button in the menu at the top of the page does not work at all; I can capture an image from the Liveview screen with no problem however. Any help would be appreciated.

Thanks

Bageston
Posts: 2
Joined: Fri Feb 19, 2016 9:14 pm

Re: 2.0.0 - Stable version

Post by Bageston » Sun Feb 21, 2016 11:21 pm

Duka Istvan wrote:If you have any problem or observation with this release please post in this forum thread.

"Script Execution does't apply the command: setcamera property="shutter" value="1"/> when I'm using the camera Canon Rebel T5. In the same camera the command for the ISO works fine."

More about this version:
http://digicamcontrol.com/news

Alonzoszemn
Posts: 1
Joined: Tue Feb 16, 2016 6:25 am
Location: Tajikistan
Contact:

2 0 0 Stable version

Post by Alonzoszemn » Thu Feb 25, 2016 10:50 am

Ok, but for building packages a stable version that is released in specific times woud be much better, even when the package will be moved too the community reposity a vcs version woud be worse.

___

XRumer 12.0.16 + SocPlugin: the BEST software for Facebook / VK / Forums / Blogs promotion!

Post Reply